3 November 2026 · Copper procurement · 11 min read · The MetalAlert team

How will US copper tariffs affect European copper prices?

A European manufacturer pays no US duty on the copper it buys, yet US tariff policy has already made that copper more expensive. The mechanism is physical: the threat of a US tariff on refined copper pulled hundreds of thousands of tonnes of metal into US warehouses, leaving less available everywhere else. That shortage outside the US supports the LME price European contracts are indexed to, and it has pushed European physical premiums to record levels for 2027.

Container cranes and a cargo ship at a container terminal in the Port of Hamburg
Image: liggraphy / Pixabay

The short answer for a European buyer, as of late October 2026: US tariffs raise European copper costs mainly through tighter ex-US supply (a firmer LME price and higher regional premiums), not through any duty you pay yourself. The size of the effect for 2027 depends on one unresolved decision: whether Washington imposes a tariff on refined copper from 1 January 2027, delays it again, or drops it. A drop would be the one outcome that could release US stocks and ease European prices.

This article explains what is and is not tariffed today, how the effect travels from New York to Hamburg, and how each 2027 scenario would likely play out. At MetalAlert we focus on LME base metals for buyers, and a binary policy event like this one is exactly where a single-number forecast is least useful and a probability view of price moves over defined horizons is most useful.

What is tariffed today, and what is not (status late October 2026)

The US measures sit under Section 232 of the Trade Expansion Act, the national security statute. The key points, as of 29 October 2026:

Product US tariff status Source
Semi-finished copper (pipes, wire, rod, sheet, tube) 50% since 1 August 2025; since 6 April 2026 charged on the full value, not just copper content CRS
Copper-intensive derivatives (cables, connectors, some electrical components) 25% of full value since April 2026 (lower rate for high US content) CRS
Scope extension, June 2026 Domestic-content threshold cut from 95% to 85%; scope widened to more semis such as electrical conductors and cables ING
Refined cathode, anodes, concentrate, ores, scrap Not tariffed CRS
Refined copper (proposed) 15% from 1 January 2027, rising to 30% in 2028: proposed, not decided Reuters via Investing.com

Commerce delivered its updated recommendation on refined copper before the 30 June 2026 deadline, but its contents have not been published and no proclamation has been issued (Peacock Tariff Consulting, 19 October 2026). In September, Reuters reported that the plan had stalled over affordability concerns ahead of the US midterm elections, with officials weighing higher manufacturing costs against support for domestic mining (Reuters via Mining.com). With the midterms on 3 November, a ruling before the vote looks unlikely (copper.com.au, 29 October 2026).

Tariff rules change quickly. Check the current position with your customs adviser before relying on any of the details above for a shipment or contract.

How a US tariff reaches a European invoice

Step 1: the Comex premium pulls metal into the US

Copper trades on two main Western benchmarks: Comex in New York and the LME in London. When traders expect a US import tariff, Comex prices rise above LME prices, because metal already inside the US will be worth more once the duty applies. If the gap (the "arbitrage") exceeds freight and financing costs, it pays to ship cathode to the US before the tariff starts.

That is what happened. The Comex-LME spread peaked above US$3,000/t in July 2025 when a 50% tariff on all copper was briefly expected. Since then, total US copper stocks have reached an estimated 1.6 million tonnes on and off exchange (Macquarie's estimate), and Comex-approved warehouses hold roughly 70% of the world's visible copper stocks (Reuters via Investing.com). Comex-linked inventories stood at 726,039 tonnes on 29 October 2026, up 60% this year (Business Recorder/Reuters).

Step 2: less metal outside the US supports the LME price

Every tonne parked in the US is a tonne not available to a smelter customer in Europe or Asia. Reuters summarised the effect plainly: US stockpiling has created shortages elsewhere and pushed prices up despite a global surplus (Reuters via Investing.com). That is why analysts can disagree so sharply. The International Copper Study Group forecasts a global refined surplus of about 104,000 t in 2026 and 368,000 t in 2027 (Reuters via Mining.com.au), while Goldman Sachs estimates an ex-US deficit of 950,000 t in 2026 (copper.com.au). Both can be true at once if the surplus sits in American warehouses.

There is a subtlety European buyers should understand. Some of the LME's own stock growth is also in the US: LME warehouses in New Orleans and Baltimore grew 44% from mid-August to nearly 130,000 t (Reuters via Investing.com). A rising LME stock figure does not necessarily mean more metal near Rotterdam or Hamburg.

Step 3: tight regional supply lifts European premiums

The LME price is only part of what you pay. Physical buyers also pay a regional premium for delivery of cathode, and that premium reflects local availability. For 2027, Aurubis set a record European premium of US$347/t, up 10% from US$315/t, and Benchmark Mineral Intelligence linked the increase partly to tariff speculation (Reuters via Kitco). Codelco followed with a record US$350/t offer to European customers, up from US$325/t, with Reuters attributing the rise to expected European shortages linked to the US flows (Reuters via Kitco).

Compare that with the Rotterdam spot premium, which copper.com.au put at a "usual" US$130-180/t in its 22 October brief (copper.com.au). Producers are asking for a substantial insurance payment on annual tonnage. Whether that is good value depends on how much you fear a renewed squeeze in 2027, which brings us to the scenarios. For checking how premiums flow into a supplier's copper base, see is our supplier's copper base fair compared with the market.

Step 4: semis trade can be redirected

The 50% duty on semis matters to European fabricators directly. The EU supplied 25% of the US$7.2 billion of semi-finished copper the US imported in 2025 (CRS). At 50% of full value, much of that trade becomes uneconomic. Volume that no longer goes to the US has to find buyers elsewhere, and Europe is the natural home market for European mills.

This is a mechanism to watch rather than a measured result: we have not found published data quantifying redirected semis volumes into Europe. If it happens at scale, it would tend to make European wire, rod, sheet and tube makers compete harder for European customers, which could soften fabrication premiums even while the copper and cathode-premium elements stay firm. Buyers of semis should track conversion charges separately from the metal price so they can see which part of their cost is moving.

Three scenarios for 2027

Nobody outside the White House knows which outcome is coming, and analysts disagree. In August, Société Générale estimated that the Comex premium implied roughly a 14.6% probability of a 15% tariff in January 2027 and about 37% of a 30% tariff by January 2028 (CNBC). Those market-implied odds move with the spread and are not forecasts in their own right.

Scenario What likely happens to Comex-LME spread Likely effect on LME price Likely effect on European premiums
A. 15% refined tariff from 1 Jan 2027 Widens toward the tariff level for deliveries after the start date Supportive, at least until the pre-deadline pull is over (ING) Stay high or rise; ex-US tightness persists
B. Delay or no decision Compresses, but likely stays wider than pre-2025 norms (ING) Mixed; the US stock overhang keeps metal locked in Sticky; 2027 annual premiums are already set
C. Refined tariff abandoned Could turn to a Comex discount large enough to export metal Most bearish case: US import demand falls and stocks could return to the global market (ING) Spot premiums could fall below annual contract levels

Scenario A: tariff imposed from January 2027

A confirmed 15% duty (about US$2,150/t at an LME price of US$14,350/t) would make the arbitrage worth chasing again until the start date. ING expected both Comex and LME prices to move higher under this outcome, with the larger move on Comex (ING). The catch is timing. With only two months to 1 January, the window to ship more metal is short, and the US already holds large stocks. The bigger effect for Europe would be that metal already in the US stays there for longer.

Scenario B: delay or continued silence

Macquarie's Alice Fox sees the January deadline passing without a decision as the most likely outcome, with the arbitrage high enough "to keep metal in the US" but not to attract much more (Reuters via Investing.com). For European buyers, that is a slow-burn version of today: no fresh squeeze, but no release either. The World Bank has warned that uncertainty over a January start could also trigger another round of stockpiling and regional shortages (as reported by copper.com.au).

Scenario C: tariff dropped and stocks released

This is the scenario that could lower European costs. But a release is not automatic. US surplus metal would only be exported if LME or Shanghai prices rose clearly above Comex, which Reuters notes would probably require severe shortages outside the US (Reuters via Investing.com). JP Morgan's Patrick Jones named US tariff inaction as the main downside risk to prices, because it would reduce US import demand (Business Recorder/Reuters). Expect the effect to arrive in stages: a drop in Comex first, then pressure on the LME price, and only later lower European spot premiums.

What European copper buyers should watch

A weekly routine that covers these is set out in our copper market weekly update template. For how much these indicators actually predict, see which indicators predict copper price moves.

What to do about it now

Separate the price components in your contracts. If your supplier quotes an all-in copper price, ask for the LME reference, the cathode premium and the fabrication charge separately. Each responds to the tariff outcome differently, and you cannot judge a renegotiation without knowing which part moved.

Decide deliberately on 2027 premium commitments. Accepting a record annual premium buys security of supply in scenarios A and B. Buying more on spot terms is cheaper if scenario C arrives. Many buyers split the difference: term cover for the volume they cannot risk being short of, spot for the rest.

Plan for a range, not a point. The tariff decision is close to binary and timing is uncertain, so a single forecast for 2027 is a weak basis for a budget. Build best, base and worst cases (see how to build a copper budget with price scenarios) and set hedging decisions against those, using the forecast ranges for the next 6-12 months as context.

Avoid betting the company on the decision. Hedging decisions that only work if you guess the White House outcome correctly are speculation. Hedging that reduces the damage in your worst-case scenario is risk management.

FAQ

Do European companies pay the US copper tariff?

No. The duty is paid on imports into the US. European buyers are affected indirectly, through the LME price, regional premiums and shifts in semis trade, unless they export copper semis or copper-intensive products to the US, in which case their US customers face the duty.

Is refined copper cathode tariffed in the US?

Not as of 29 October 2026. Cathode, anodes, concentrate and scrap are excluded. A 15% tariff from January 2027 rising to 30% in 2028 has been proposed but not adopted.

Why are European copper premiums at record highs if the world is in surplus?

Because a large share of the surplus sits in US warehouses, held there by the possibility of a tariff. Producers expect European supply to stay tight in 2027 and priced their annual premiums accordingly.

Would dropping the tariff plan make copper cheaper in Europe?

Probably, but gradually. US stocks would need a price incentive to leave, and it would take months for any release to show up in European availability and premiums.

Sources

Where MetalAlert fits

A policy decision with three distinct outcomes is a poor fit for one forecast number. What a buyer needs is an estimate of how likely a material price move is over the horizon that matters for the next purchasing decision, and a sense of whether that likelihood has shifted. If you want to see how probability estimates for LME copper over defined horizons could support timing and cover decisions around the tariff deadline, MetalAlert is built for exactly that question. The probabilities are estimates, not guarantees, and they work best alongside your own volume, contract and risk-tolerance constraints.

Book a walkthrough Get early access
← All posts MetalAlert home